C46K MSY/C46K CNC inclined the lathe with gang tools adopts an integrated bed of 35 ° inclined and a molten iron structure of circular cavity to guarantee heavy cutting capabilities.
| Maximum machining diameter: 160 mm |
| Maximum machining length: 180 mm |
| Chuck size: 6 "inch |
DETAIL PARAMETERS
VIDEO DISPLAY
The bed is molten with high quality resin sand, which has good rigidity, good resistance to clashes and elimination of smooth chips. The shining box rolling adopts an angular contact bearing design with high rigidity. Heat dissipation adopts a corresponding structural design to reduce the thermal deformation of the spindle, so that the spindle can maintain the relative stability of the spindle axis during the long -term operation. The X and Z axis servomotores are directly connected to the precision ball screw through elastic couplings, with high precision. Both ends of the screw are fixed, which improves the support of the support base and eliminates the distortion of the screw caused by the frequent high speed positioning and the heavy cut. The deformation is minimized, and the bearings adopt a pair of precision bearings with angular contact of 60 degrees dedicated to the screw, with high speed and high precision.
It adopts the 35 ° machine bed, C46K MSy is with built -in spindle, axis and 12 bmt40 bossed post tool, hydraulic through chuck, without back cover, suitable for the processing of the workpiece of the plate.
C46K is with servo axis, type of gang, but without turret and counterpart.
Standard | Optional |
1. Siemens 828D Advanced Control System | 1. Syntec 22TB Control System |
2. A2-5 (C46KMSY), A2-6 (C46K) | 2. GSK 988TA Absolute Control System |
3. incorporated spindle | 3. Reneishaw Auto Tool Setter |
4. Hydraulic through Chuck 6 inches | 4. Auto Barfeeder |
5. 12 -year -old tool turret and Aixs Laveed 12 (BMT40) | 5th Petroleum Skimmer |
6. Without counterproduction | 6. Cyps Ence |
7. Roller linear guide | 7. Fly cutter device |
Configuration | C46K MSY | C46K | ||
Machining capacity | Maximum swing on the bed | φ/mm | 460 | 400 |
Maximum balance on the slide | φ/mm | 140 | 140 | |
Maximum machining length | mm | 180 | 380 | |
Maximum machining diameter | φ/mm | 160 | 430 | |
Maximum bar diameter | φ/mm | 45 | 50 | |
Spindle | Spindle head type | GB59001 | A2-5 | A2-6 |
Spindle hole | φ/mm | 56 | 62 | |
Spindle speed | R/min | 60-5000 | 50-3000 | |
Spindle change mode | Incorporated axis | Servo | ||
Torque with spindle classification | New Mexico | 110 | 72 | |
Main motor power | Kw | 12.3 | 5.5 | |
Chuck type | Hydraulic through Chuck | Hydraulic through Chuck | ||
Chuck size | inch | 6 " | 8 " | |
Feed rate | Rapid transverse speed on the X axis | m/min | 25 | 25 |
Rapid transverse speed on the z axis | m/min | 25 | 25 | |
Torque Motor Servo on the X axis | New Mexico | 7.5 | 7.5 | |
Torque Motor Servo on the Z axis | New Mexico | 7.5 | 7.5 | |
X -axis trips | mm | 90 | 460 | |
Z Trips Z | mm | 180 | 400 | |
Axis trips and | mm | ± 40 | / | |
Guide -type type | Roller linear guide | Roller linear guide | ||
Turret | Type of turret | Axis and high 12 posts tools turret (BMT40) | Type of gang | |
Pandilla type work bank size | mm | 250 × 730 | 250 × 730 | |
Tool size | 20 × 20 /φ25 /er20 | 20 × 20/φ25 | ||
Remove | Type of Atalde | Without counterproduction | Without counterproduction | |
Energy source | Total nominal power | KVA | 18.5 | 13 |
Total current qualified | A | 40 | 38 | |
Dimension | Machine weight | kg | 2490 | 2390 |
Machine dimension | L*w*h (mm) | 2520 × 1780 × 2000 | 2520 × 1780 × 1820 |
Keep in mind that this parameter and appearance are subject to changes without prior notice, thanks.
KEEP IN TOUCH
"Center lathes" usually refer to the more basic traditional horizontal lathes. The core working method is to use the top of the spindle box and the tailstock to clamp and support the center holes at b...
READ MOREWhat is a center lathe? The term "center lathe" usually refers to the more common and basic traditional horizontal lathe, which is what we often call an ordinary lathe or engine lathe. It is called a ...
READ MOREEastern CNC Profile Taizhou Eastern Numerical Control Equipment Co., Ltd. (hereinafter referred to as Eastern CNC) is a well-known domestic CNC machine tool brand and a professional R&D and manufa...
READ MOREWith the continuous demand for high-precision and high-efficiency processing equipment in the manufacturing industry, slant bed CNC lathes are gradually becoming one of the important equipment in the ...
READ MOREIntroduction to Horizontal CNC Lathes The horizontal CNC lathe is a versatile machine tool that is used for shaping and cutting metal or other materials. The "horizontal" aspect refers to the orientat...
READ MOREAll of your quotes will be answered within 2 hours by our professional sales support.
Use reliable parts and components to ensure product quality.
You can expect your order fulfilled within 60 days after placing the order.
You can enjoy a one-year many for all of our produons.